GE Medical Systems 500, User Manual, Page: 633 / 636

Index
LOGIQ 500 Basic Users Manual
2276612–100 Rev. 0
Index 23

Single, 10–34
Single Plane Ellipsoid Method, 10–15
Site Requirements,
3–3
Before the system arrives,
3–4
Environmental Requirements, 3–5
Slant Scan
Color Flow, 5–36
Doppler,
5–65
Small Parts
Calculations. See General Calculations
Measurements. See General Calculations
Smoke & Fire Hazard, 2–3, 2–6
Smoothing, B–Mode, Image Softener, 5–21
Soft Key, 3–38
Soft Menu
B–Mode
3D Mode,
5–21
Adjust for Ref,
5–25
ATO Create,
5–16
ATO On/Off,
5–17
Biopsy Guidezone(s),
5–23
Color,
5–21
Color Tag, 5–22
Dynamic Range, 5–15
Edge Enhance, 5–24
Focus Number, 5–16
Focus Position, 5–22
Frame Averaging, 5–18
Gray Scale Map, 5–15
Image Rotation, 5–23
Image Softener, 5–21
Imaging Freq, 5–18
Intermt Scan, 5–25
Intervl, 5–25
Rejection, 5–24
Tag Position, 5–22
Timer Start, 5–25
Color Flow
3D Mode, 5–43
ACE, 5–42
Adjust for Ref, 5–44
CFM for Ref, 5–44
Color Capture, 5–39
Color Flow Map, 5–36
Color Tag, 5–41
Color Threshold, 5–39
Diag Mode, 5–37
Frame Average, 5–38
High Resolution, 5–39
Intermt Scan, 5–45
Intervl, 5–44
MR–Flow, 5–43
MTI Filter, 5–37
Noise Blanker, 5–42
Packet Size, 5–40
Penet., 5–38
Persistence, 5–43
Slant Scan, 5–36
Spatial Filter, 5–40
Tag Position, 5–41
Timer Start, 5–44
W.E. Cancel, 5–41
Control Panel, 3–38
Doppler
ASO Option,
5–64
Auto Angle,
5–64
Calc Dir,
5–70
CFM Shrink,
5–69
CFM/PWD Ratio,
5–69
Color,
5–68
Color Tag,
5–68
Dynamic Range, 5–71
HPRF, 5–69
Penetration, 5–67
RealTime Trace, 5–70
Rejection, 5–69
Sample Volume Length, 5–66
Slant Scan, 5–65
Sweep Speed, 5–67
Tag Position, 5–68
Trace Method, 5–71
Wall Filter, 5–66
M–Mode
Color, 5–79
Color Tag, 5–80
Dynamic Range, 5–77
Edge Enhance, 5–78
Gray Scale Map, 5–77
Rejection, 5–78
Sweep Speed, 5–79
Tag Position, 5–80
PFD Mode
Persistence,
5–49
PFD Map,
5–48
PFD Type, 5–49
Resolution, 5–48
Software Option
Cardiology, 10–1
OB, 9–1
Vascular, 11–1
Sort Criteria for Schedule List, System Parameters
menu page 7, 14–67