manualshive.com logo in svg

GE Medical Systems 500, User Manual, Page: 426 / 636

Share
Download
GE Medical Systems 500 User Manual Download Page 426

Custom Display

LOGIQ     500 Basic Users Manual

2276612–100  Rev. 0

14–22

Page 4 of 20 (Imaging Parameter 4 – Probe Dependent 4) (cont’d)

PWD Alternative Scan     EC, UP, P

Choose the action of the B-Pause key while in PWD Mode.

On

Pressing B-Pause toggles between B-Mode frozen/PWD real-time or B-Mode 
real-time/PWD frozen.

Off

Pressing B-Pause freezes or unfreezes the B-Mode image only.

PWD/CWD Flow Angle [deg]     EC, UP, P, R

Choose the default for the Doppler flow 

θ 

angle.

Value from -80 to +80 in 5

°

increments.

CFM/PWD Ratio in Triplex     EC, UP, P, R

Choose the velocity ratio between the CFM display and Pulsed Doppler.

1/1

Same velocity display.

1/2

Pulsed Doppler velocity 2 times CFM.

1/4

Pulsed Doppler velocity 4 times CFM.

PDI/PWD Ratio in Triplex     EC, UP, P, R

Choose the velocity ratio between the PDI display and Pulsed Doppler.

1/1

Same velocity display.

1/2

Pulsed Doppler velocity 2 times PDI.

1/4

Pulsed Doppler velocity 4 times PDI.

CFM/PDI Shrink in Triplex     EC, UP, P, R

Choose to turn CFM/PDI shrink function on or off.  Allows for shrinking of the CFM/PDI
window to a specified value to improve frame rate.

On or Off.

CFM/PDI Shrink Angle/Width   [deg, mm]     EC, UP, P, R

Choose the shrink value for the CFM/PDI window in degrees for convex and sector
probes or millimeters for linear probes.

Value range depends on probe type.

CFM/PDI Performance Priority        EC, UP, R,  P

Used to avoid the color sensitivity deterioration in Triplex mode for the MR–Flow
supported probes.

Max Res.

Best resolution and sensitivity (Version 5.00y level).

Triplex_Sens.

Best color sensitivity in Triplex mode for the MR–Flow supported 
probes.

NOTE:  The color sensitivity does not change for the M12L and C358 probes, even if the
“Triplex_Sens.” is selected.

Summary of Contents for 500





























































































































































































































































































































































































































































































































































































































































Reviews:

No comments