manualshive.com logo in svg

GE Medical Systems 500, User Manual, Page: 250 / 636

Share
Download
GE Medical Systems 500 User Manual Download Page 250

Mode Measurements

LOGIQ     500 Basic Users Manual

2276612–100  Rev. 0

7–22

Depth Difference with Time and Slope

To measure depth difference:

Press Measurement 3 times.  With the cursor in the M-Mode
timeline area, a “

” cursor with a vertical dotted line is

displayed.

Use the Trackball to position the measurement start point.

Press Set to fix the start point.

Use the Trackball to position the measurement end point.

Press Set to complete the measurement.

The depth difference, time interval and slope between the 2 end
points is displayed at the bottom of the screen.

Summary of Contents for 500





























































































































































































































































































































































































































































































































































































































































Reviews:

No comments