![background image](http://html1.mh-extra.com/html/ducati/monster-s4-fogarty-2002/monster-s4-fogarty-2002_workshop-manual_2537693101.webp)
Mototelaio / Frame
101
▲
Fit the seal (24) and the
compression adjuster (14).
▲
Tighten to the specified torque.
▲
Fill each fork leg with half the
amount of the specified oil.
▲
Fill the damper rod from the top
hole until oil comes out from the
side vent hole.
▲
Pump the rod and the slider up
and down at least
10
times
(completing a stroke of a least
150 mm
) so that the oil fills the fork
leg completely.
▲
Move the damper rod and the
slider to the end of their stroke.
▲
Pour the remaining oil into the
stanchion tube and measure the oil
level.
Caution
The fork leg must be in a
vertical position when measuring
the oil level. Ensure that both fork
legs have the same oil level.
●
Recommended oil:
SHELL ADVANCE FORK 7.5 or
DONAX TA
●
Standard capacity:
492±2.5 c.c.
●
Standard oil level:
94 mm
The amount of oil in a fork affects
the performance of the fork at the
end of the compression stroke.
A high oil level will increase the
compression load; a low oil level
will decrease the compression load.
▲
Installare la guarnizione (24) e la
vite di registro (14) compressione.
▲
Serrare alla coppia di serraggio
prescritta.
▲
Introdurre metà del quantitativo
prescritto di olio in ogni stelo.
▲
Riempire poi dal foro superiore
dell’asta la cartuccia ammortizzatore
fino a quando inizierà ad uscire olio
dal foro di sfiato laterale.
▲
Pompare per almeno
10
volte con
l’asta e con il fodero (facendo una
corsa di almeno
150 mm
) per
permettere all’olio di riempire tutto
il volume interno.
▲
Portare a fondo corsa sia l’asta
ammortizzatore che il fodero
esterno.
▲
Introdurre il rimanente
quantitativo di olio nello stelo e
misurare il livello.
Importante
Posizionare verticalmente lo
stelo quando si misura il livello.
Verificare che il livello sia il
medesimo in entrambi gli steli.
●
Olio raccomandato:
SHELL ADVANCE FORK 7,5 o
DONAX TA
●
Capacità Standard:
492±2,5 cc
●
Livello olio Standard:
94 mm
Il quantitativo di olio influisce sul
comportamento della forcella in fine
corsa di compressione.
Un livello di olio alto aumenta il
carico in compressione, un livello
basso lo diminuisce.
94 mm
12
16
Summary of Contents for monster S4 fogarty 2002
