![background image](http://html1.mh-extra.com/html/ducati/monster-s4-fogarty-2002/monster-s4-fogarty-2002_workshop-manual_2537693112.webp)
112
Mototelaio / Frame
RIMONTAGGIO
SOSPENSIONE POSTERIORE
▲
Lubrificare con grasso prescritto il
gambo del perno (1) e le superfici di
contatto della rosetta (2).
▲
Lubrificare con grasso prescritto
la filettatura del perno e il sottotesta
del dado (3).
▲
Inserire il bilanciere completo tra i
supporti del telaio, nella posizione
raffigurata.
▲
Montare la rosetta (2) nel perno
(1) con il lato
concavo
rivolto verso il
perno.
▲
Inserire il perno fino in battuta sul
telaio.
▲
Installare il dado (3) con la parte
esagonale
verso l’esterno.
▲
Bloccare il dado e serrare la vite
alla coppia prescritta.
▲
Ingrassare filetto e sottotesta
delle viti (4) e (5) di fissaggio
superiore ammortizzatore e
tirante ed impuntarle nel
bilanciere.
▲
Disporre l’ammortizzatore con il
raccordo del tubo di collegamento al
serbatoio di compensazione in alto
e rivolto verso il posteriore.
▲
Inserire lo snodo superiore
dell’ammortizzatore in
corrispondenza del foro posteriore
del bilanciere.
▲
Bloccare la vite (4) alla coppia
prescritta.
▲
Installare le boccole (6) su
entrambi gli snodi del tirante.
▲
Inserire l’estremità superiore del
tirante nel bilanciere e bloccare la
vite (5) alla coppia prescritta.
▲
Installare l’estremità inferiore
dell’ammortizzatore e del tirante nel
forcellone inserendo le boccole (7).
▲
Ingrassare nel diametro di
scorrimento la bussola filettata (8) e
introdurla nel supporto con la parte
cilindrica.
▲
Ingrassare filetto, sottotesta
e diametro di scorrimento
della vite di fissaggio inferiore (9)
ed inserirla nel forcellone dal lato
destro.
▲
Bloccare la vite alla coppia di
serraggio prescritta.
7
8
1
2
A
B
3
B
B
B
REFITTING THE REAR
SUSPENSION
▲
Lubricate the pin shank (1) and
the contact surfaces of the washer
(2) with the recommended grease.
▲
Lubricate the pin threading and
the nut underhead (3) with the
recommended grease.
▲
Insert the complete rocker arm
between the frame supports, as
shown in the figure.
▲
Fit the washer (2) into the pin (1)
with its
concave
side facing the pin.
▲
Insert the pin in the frame until it
is fully seated.
▲
Fit the nut (3) with its
hexagon
side facing outwards.
▲
Clamp the nut and tighten the
screw to the specified torque.
▲
Lubricate threading and
underhead of the screws (4) and (5)
fixing the upper part of the
monoshock with the linkage and
snug them into the rocker arm.
▲
Position the monoshock with the
compensation reservoir hose union
at the top facing back.
▲
Insert the monoshock upper joint
in the rocker arm rear hole.
▲
Tighten the screw (4) to the
specified torque.
▲
Fit the bushings (6) onto both
linkage joints.
▲
Insert the upper end of the
linkage into the rocker arm and
tighten the screw (5) to the
specified torque.
▲
Assemble the lower end of the
monoshock and the linkage into the
swingarm by inserting the bushings
(7).
▲
Grease the sliding surface of the
threaded bushing (8) and fit its
cylindrical side into the support.
▲
Grease the threading, underhead
and sliding surface of the lower
retaining screw (9) and insert into
the swingarm from the RH side.
▲
Tighten the screw to the
specified torque.
B
9
Summary of Contents for monster S4 fogarty 2002
