![background image](http://html1.mh-extra.com/html/ducati/monster-s4-fogarty-2002/monster-s4-fogarty-2002_workshop-manual_2537693256.webp)
256
Impianto elettrico / Electrical System
Note
Prima di portare l’interruttore su
“On” assicurarsi che questo sia su
“Off” da almeno 30 secondi.
Sul display (4) del cruscotto appare il
numero delle chiavi inserite, con a
fianco un countdown con partenza da
30. Il valore del numero delle chiavi
inserite varia in funzione del tipo di
programmazione che si sta effettuando:
per la prima programmazione da
crucotto nuovo compare il valore "1",
per una riprogrammazione di una
chiave compare il valore "2".
Note
Per la prima programmazione da
cruscotto nuovo di una chiave nuova, il
countdown si avvia nel momento in cui
viene inserita la chiave rossa.
Per la riprogrammazione di una chiave il
countdown si avvia quando viene
inserita la chiave nera.
●
Accertarsi che il countdown sia
partito e, prima che arrivi a 0 (circa 3
secondi di tempo), portare
l’interruttore su “Off”;
●
entro 15 secondi occorre rimuovere
la chiave rossa, inserire una chiave
nera (5) e posizionare l’interruttore su
“On” (sul display compare il numero
di chiavi inserite, in questo caso 2,
con a fianco il countdown con
partenza da 30);
●
accertarsi che il countdown sia partito
e, prima che arrivi a 0, portare
l’interruttore su “Off”
●
entro 15 secondi occorre rimuovere
la chiave nera, inserire l’altra chiave
nera (6) e posizionare l’interruttore su
“On” (sul display compare il numero
di chiavi inserite, in questo caso 3,
con a fianco il countdown con
partenza da 30);
●
accertarsi che il countdown sia partito
e, prima che arrivi a 0, portare
l’interruttore su “Off”;
●
entro 15 secondi occorre rimuovere
la chiave nera, reinserire la chiave
rossa e posizionare l’interruttore su
“On” (sul display compare il numero
di chiavi inserite, in questo caso 4,
con a fianco il countdown con
partenza da 30);
●
al termine del countdown si leggerà
la dicitura "On" se è stata accettata,
mentre si leggerà la dicitura "Off" se
non è stata accettata;
Note
Se la programmazione è andata
a buon fine il led (A) sul cruscotto
lampeggia.
●
Prima di portare l’interruttore
nuovamente su “On” attendere
almeno 30 secondi.
●
Verificare la corretta programmazione
dell’immobilizer come riportato nei
paragrafi seguenti e
successivamente reinserire le tre
chiavi nell'anella.
5
6
N˚ di chiavi
inserite
No. of keys
inserted
Conto alla
rovescia
Countdown
A
4
Note
The switch must stay in the
“Off” position for at least 30
seconds before it is turned to “On”.
The instrument panel display (4)
shows how many keys you have
inserted and a countdown from 30
to zero at the side.
The number of inserted keys
changes depending on the type of
programming. When the instrument
panel is programmed for the first
time from new, a number “1” is
displayed. When a key is re-
programmed, the display will show
number “2”.
Note
When the new instrument
panel is used to program a new key,
the countdown starts the moment
the red key is inserted.
When re-programming a key, the
countdown begins when the black
key is inserted.
●
Make sure countdown has begun,
and turn the switch to “Off”
before it reaches 0 (you have
about 3 seconds time).
●
Remove the red key, insert a black
key (5) and set the switch to
“On” within the next 15 seconds
(display shows the number of
keys inserted, in this instance 2,
with the countdown from 30 to 0
at the side).
●
Make sure countdown has begun,
and turn the switch to “Off”
before it reaches 0.
●
Remove the black key, insert the
other black key (6) and set the
switch to “On” within the next
15 seconds (display shows the
number of keys inserted, in this
instance 3, with the countdown
from 30 to 0 at the side).
●
Make sure countdown has begun,
and turn the switch to “Off”
before it reaches 0.
Remove the black key, insert the
red key and set the switch to
“On” within the next 15 seconds
(display shows the number of
keys inserted, in this instance 4,
with the countdown from 30 to 0
at the side).
●
When countdown is over, the
word “On” appears to indicate
acknowledgement. The word
“Off” means programming failed.
Note
The instrument panel LED (A)
flashes to indicate successful
programming.
●
Wait at least 30 seconds before
setting the switch to “On” again.
●
Check for correct immobilizer
programming as described in the
following paragraphs and then
refit the three keys in the ring.
Summary of Contents for monster S4 fogarty 2002
