Rexroth Indramat CLM1.4, Manual

Page: 49 / 274

5-8
Writing the User Program CLM01.4-LAP-01VRS
DOK-CONTRL-CLM01.4LAP1-FK01-EN-P
The value of variable V603 is negative. An error message is
generated.
POI 1 -V604 V601
The content of variable V604 is negative. With the
operational sign from the command, the feed length
becomes positive.
Available Variables
The following variables are available for NC user programs:
V600 to V999
System Variables
The system variables can only be read.
No. Definition
V000 Zykluszähler 1 Datenumfang 0 – 99999999
V001 Zykluszähler 2 nur im Automatikbetrieb 0 – 9999999
V002 Aktueller Satz Task1
V003 Aktueller Satz Task2
V004 Aktueller Satz Task3
V005 Aktueller Satz Task4
V005 Aktueller Satz Task5
V006
V007 Analog Input 1 standardized to +/- 1
V008 Analog Input 2 standardized to +/- 1
V009 Analog Input 3 standardized to +/- 1
V010 Analog Input 4 standardized to +/- 1
V011 Actual Velocity of Master Encoder 1
V015 IDS01: Length of IDS, 5 places before decimal / 1 after
V016 IDS01: Length of IDS, 4 places before decimal / 2 after
V017 IDS01: Length of IDS, 3 places before decimal / 3 after
Fig. 5-1: System Variables