Rexroth Indramat CLM1.4, Manual

Page: 17 / 274

2-2
Important directions for use CLM01.4-LAP-01VRS
DOK-CONTRL-CLM01.4LAP1-FK01-EN-P
Areas of use and application
For CLM1.4-LAP Rexroth Indramat defines appropriate use as for
precision motion control of to four axes.
Control and monitoring of (the) CLM1.4-LAP may require additional
sensors and actors.
Note: CLM1.4-LAP may only be used with the accessories and parts
specified in this document. If a component has not been
specifically named, then it may not be either mounted or
connected. The same applies to cables and lines.
Operation is only permitted in the specified configurations and
combinations of components using the software and firmware
as specified in the relevant function descriptions.
The CLM1.4-LAP and every drive controller has to be programmed before
starting it up, making it possible for the motor to execute the specific
functions of an application.
The CLM1.4-LAP has been developed for use in single or multiple-axis
drives and control tasks.
Typical applications of CLM1.4-LAP are:
•
Handling and assembly systems,
•
Roll feeds
•
Automatic bending machines and
•
Woodworking machines
The CLM1.4-LAP may only be operated under the assembly, installation
and ambient conditions as described here (temperature, system of
protection, humidity, EMC requirements, etc.) and in the position
specified.
2.2 Inappropriate use
Using the CLM1.4-LAP outside of the above-referenced areas of
application or under operating conditions other than described in the
document and the technical data specified is defined as “inappropriate
use".
CLM1.4-LAP may not be used if
•
they are subject to operating conditions that do not meet the above
specified ambient conditions. This includes, for example, operation
under water, in the case of extreme temperature fluctuations or
extremely high maximum temperatures or if
•
Rexroth Indramat has not specifically released them for that intended
purpose. Please note the specifications outlined in the general Safety
Guidelines!