Rexroth Indramat CLM1.4, Manual

Page: 157 / 274

8-40
Parameters CLM01.4-LAP-01VRS
DOK-CONTRL-CLM01.4LAP1-FK01-EN-P
B019 Memory Display
M e m o r y D i s p l a y
B 0 1 9
0 F F 0 0 0 0 0 0 0 0
Reserved
Reserved
Address (Hex Format)
0 = Memory display off
1 = Memory display on
If the memory display is turned on, the contents of the entire RAM
memory can be shown on the display. The memory address in Parameter
B019 is a default address that is shown on the display after turning on the
CLM or after a fault.
However, the address may be changed during operation by directly
overwriting it.
With the ’plus’ and ’minus’ keys, the memory address can be changed
byte-by-byte.
The letters ’A’ to ’F’ are composed by simultaneously pressing the key
combination ’Save’ and ’Number.’ The following key combinations
compose each letter:
Save
and 1 = A Save and 2 = B
Save and 3 = C Save and 4 = D
Save and 5 = E Save and 6 = F