Rexroth Indramat CLM1.4, Manual

Page: 161 / 274

8-44
Parameters CLM01.4-LAP-01VRS
DOK-CONTRL-CLM01.4LAP1-FK01-EN-P
Designation No. Axis 1 Axis 2 Axis 3 Axis 4
Mode Ax 00*
Feed Constant Ax 01*
Gear Ax 02*
Min. Travel Limit Ax 03
Max. Travel Limit Ax 04
Modulo Value Ax 05
Maximum Velocity Ax 06
Jog Velocity Ax 07
Bipolar Acceleration Rate Ax 08*
Acceleration / Deceleration Rate Ax 09*
Jerk Constant Ax 10
Kv Factor Ax 11*
Drive Sensitivity Ax 12*
Reserved (Free) Ax 13
Monitoring Window Ax 14
Feed Angle Monitoring/Interrupt Ax 15
Encoder Difference Ax 16
Absolute Encoder Monitoring Window Ax 17
Reserved (Free) Ax 18
Encoder Data Ax 19
Encoder Type Ax 20
Drive Direction Ax 21
Absolute Encoder Home Position Ax 22
Homing I/O Ax 23
Homing Search Distance Ax 24
Homing Offset Ax 25
Reserved (Free) Ax 26
Switching Threshold Ax 27
Position Window Ax 28
Presignaling Ax 29
Open Feed Roll Ax 30
Measuring Wheel Mode Ax 31
Various Functions Ax 32
Cut Inhibit Ax 33 --- --- ---
Cut Vector Ax 34 --- --- ---
Fig. 8-12: Parameter List Ax.xx
Note: The parameters designated with ’*’ may only be altered with
permission of the machine builder or drive manufacturer!