CLM01.4-LAP-01VRS
Parameters
8-35
DOK-CONTRL-CLM01.4LAP1-FK01-EN-P
B017 Analog Input / Override
A n a l o g
I n p u t
B 0 1 7
0
1
1
0
0
1
Number of values for an average calculation
Minimum velocity limit: 0 = 5%
1 = 0%
Override Axis 4
Override Axis 3
Override Axis 2
Override Axis 1
1) Average calculation of the analog input:
0 = No average
1 = Average of
8 measurements per analog input
2 = Average of
16 measurements per analog input
3 = Average of
32 measurements per analog input
4 = Average of
64 measurements per analog input
5 = Average of
128 measurements per analog input
6 = Average of
256 measurements per analog input
7 = Average of
512 measurements per analog input
8 = Average of
1024 measurements per analog input
9 = Average of
2048 measurements per analog input
The values that have been read in can be queried via Status 45 or 49.
2) Override
The following inputs are possible for override:
0 = override is off
1 = Override via Analog Input 1
2 = Override via Analog Input 2
3 = Override via Analog Input 3
4 = Override via Analog Input 4
5 = Binary encoded override via Inputs I1.01.0 to I1.01.7
6 = Gray-coded override via Inputs I1.01.4 to I1.01.7
Any analog input can be assigned to an axis.
Summary of Contents for CLM1.4
