Rexroth Indramat CLM1.4, Manual, Page: 127 / 274

8-10
Parameters CLM01.4-LAP-01VRS
DOK-CONTRL-CLM01.4LAP1-FK01-EN-P
Ax05 Axis x Modulo Value
M o d u l o V a l u e A x
A x 0 5
0 1 2 3 4 5 . 7 8 9 0
0 = programmed direction (for rotary table)
1 = shortest path
modulo value (in preparation)
When the modulo format is set, the modulo value determines the numeric
value at which the position data overflow to 0.
This parameter is used only with motion type 2 (rotary table, Parameter
Ax00) and normally indicates the circumference of the table.
Input min.: 0.000 IU
Input max.: 200000.000 IU