Rexroth Indramat CLM1.4, Manual, Page: 33 / 274

4-4
Display and Operating Devices CLM01.4-LAP-01VRS
DOK-CONTRL-CLM01.4LAP1-FK01-EN-P
After pressing this key, the data shown on the display is transferred to the
program memory or the parameter memory.
After the data is transferred, the next instruction (current instruction
1) or the next parameter (current parameter 1) is
displayed.
Available only in Parameter mode.
4.3 Description of the Display Modes
Because of the varied information that must be displayed, the display is
multi-functional. The operating mode determines the available quantity
and types of display modes.
The following operating modes exist:
Parameter
Manual
Automatic
Depending on the operating mode, the following displays are possible:
Operating Mode: Parameter
1. Parameter Input
Operating Mode: Manual
1. CLM Software Version / Diagnostics
2. (Material Velocity)
3. Variable Display
4. Status of the Inputs or Outputs
5. Counter
6. Position Display / Position Lag / Remaining Length /
Speed
7. Task Display
8. Program Input
Operating Mode: Automatic
1. CLM Software Version / Diagnostics
2. (Material Velocity)
3. Variable Display
4. Status of the Inputs or Outputs
5. Counter
6. Position Display / Position Lag / Remaining Length /
Speed
7. Task Display
8. Program Input