Stand 15.02.2016
Seite 1 von 10
Mounting Instructions
82132/33 Code-Combi B with Plastic Control Unit
1 General
These mounting instructions are the basis for the approval by ECBS, VdS, A2P (CNPP), DNV or UL. Installation of the
lock exclusively in accordance with these instructions.
Guidelines of the national certification bodies are to be considered and complied with in addition.
Use high quality alkaline/manganese monobloc batteries only. Low quality batteries may cause oxidation which results in a
functional failure of the lock.
Avoid residual crystalline moisture in the cabinet (e.g. from varnishing) so as to prevent attack of the electrical contacts.
Make sure that ingress of dirt or detergents (e.g. remaining fillers or cold cleaners) is prevented.
Do not grease/oil the lock or key.
2 Mounting instructions for lock and control unit
-
RH version (standard version):
Lock mounting position
Bolt left, keyhole horizontal
Lock downwards, keyhole vertical
Lock upwards, keyhole vertical
-
LH version
Lock mounting position
Bolt right, keyhole horizontal
