![background image](http://html1.mh-extra.com/html/omron/cs1w-213-rev-02-2008/cs1w-213-rev-02-2008_operation-manual_742355346.webp)
321
Error Code Lists
Section 11-5
Origin search
Origin detection
method error
1607
Even though the axis parameters’ origin
search operation is set for other than sin-
gle-direction mode, the origin detection
method setting is not 0, 1, or 2.
Transfer the data
again after
checking and
correcting it.
When this error
occurs during
data transfer, all
data (including
the data with the
error) specified
for transfer will
be lost.
All operating
axes will be
decelerated to a
stop.
Backlash
compensation
Backlash com-
pensation error
1700
The axis parameters’ backlash compensa-
tion setting is outside the settable range (0
to 9,999pulses).
Backlash com-
pensation
speed error
1710
The axis parameters’ backlash compensa-
tion speed setting exceeds the maximum
speed setting.
Software lim-
its
CW software
limit error
1800
The axis parameters’ CW software limit
setting is outside the settable range
(–1,073,741,823 to 1,073,741,823).
CCW software
limit error
1801
The axis parameters’ CCW software limit
setting is outside the settable range
(–1,073,741,823 to 1,073,741,823).
Zones
Zone 0 CW
error
1900
Zone 0’s CW data is outside the settable
range (–1,073,741,823 to 1,073,741,823).
Zone 0 CCW
error
1901
Zone 0’s CCW data is outside the settable
range (–1,073,741,823 to 1,073,741,823).
Zone 1 CW
error
1910
Zone 1’s CW data is outside the settable
range (–1,073,741,823 to 1,073,741,823).
Zone 1 CCW
error
1911
Zone 1’s CCW data is outside the settable
range (–1,073,741,823 to 1,073,741,823).
Zone 2 CW
error
1920
Zone 2’s CW data is outside the settable
range (–1,073,741,823 to 1,073,741,823).
Zone 2 CCW
error
1921
Zone 2’s CCW data is outside the settable
range (–1,073,741,823 to 1,073,741,823).
Position data
Target position
error
2000
to
2099
The position data is outside the settable
range (–1,073,741,823 to 1,073,741,823).
(The last two digits of the code indicate the
position data number where the error
occurred.)
Item
Name
Code
Cause
Clearing
method
Operation after
error
Summary of Contents for CS1W-213 - REV 02-2008
