Omron CS1W-213 - REV 02-2008, Operation Manual

Page: 5 / 401

vi
Unit Versions of CS-series Position Control Units
Unit Versions
A “Unit version” has been introduced to manage Position Control Units in the
CS Series according to differences in functionality accompanying Unit
upgrades.
Notation of Unit Versions
on Products The Unit version is given to the right of the lot number on the nameplate of the
applicable Position Control Units, as shown below.
The Unit version of the Position Control Units begins at version 2.0.
Confirming Unit Versions
with Support Software The Unit version can be confirmed in Unit Manufacturing Information of CX-
Programmer version 4.0 or higher using the following procedure.
1,2,3... 1. In the IO Table Window, right-click the Position Control Unit and select Unit
Manufacturing information.
2. The following Unit Manufacturing information Dialog Box will be displayed.
Example: Unit version 2.3 will be displayed in the Unit Manufacturing
information Dialog Box.
Use the above display to confirm the Unit version of the Position Control
Unit.
CS-series Position Control Unit
Product nameplate
Unit version
Example for Unit version 2.3
CS1W-NC113
NC UNIT
Lot No. 031001 0000 Ver.2.3
OMRON Corporation MADE IN JAPAN
1
24
1
24
RUN
ERC
SENS
X
ERH
DATA
NC113
CS
MACH
No.
X10
1
987
65
43
2
1
0
X10 0
987
65
43
2
10
Unit version
2.3