![background image](http://html1.mh-extra.com/html/omron/cs1w-213-rev-02-2008/cs1w-213-rev-02-2008_operation-manual_742355058.webp)
33
External I/O Circuitry
Section 3-3
Inputs
For details on connecting origin input signals, refer to 42.
!Caution
Use either the 24-VDC origin input signal or the 5-VDC origin input signal, but
not both. If both are connected it will damage the internal circuitry.
Do not connect the 5-VDC origin input signal input to any output circuit except
the line driver.
Output power supply, 24 VDC
680
Ω
4.7 k
Ω
(1/2W)
Positioning completed input signal
Input common
680
Ω
4.7 k
Ω
(1/2W)
External interrupt input (N.O. contact)
680
Ω
4.7 k
Ω
(1/2W)
Emergency stop (N.C. contact)
(see note)
680
Ω
4.7 k
Ω
(1/2W)
Origin proximity input
(N.O./N.C. contact) (see
note)
680
Ω
4.7 k
Ω
(1/2W)
CW limit input (N.O./N.C.
contact) (see note)
680
Ω
4.7 k
Ω
(1/2W)
CCW limit input (N.O./N.C.
contact) (see note)
680
Ω
4.7 k
Ω
(1/2W)
Origin input signal (24 V)
(N.O./N.C. contact) (see note)
150
Ω
Origin input signal
(N.O./N.C. contact) (see
note)
Origin common
Line driver output
Summary of Contents for CS1W-213 - REV 02-2008
