Omron CS1W-213 - REV 02-2008, Operation Manual

Page: 270 / 401

245
Override Section 9-6
• Beginning word of the common parameter area, m = 100
×
unit
number
• Beginning word of the operating data area, l, is specified in m and m+1.
Set the beginning words of the operating data area and designate the axis
parameters used with the common parameters as shown below.
9-6-3 Operating Memory Area Allocation and Operating Data Area
Settings
Operating Memory Area
Operating Data Area
Word Name Bit Reference
m Operating data area
designation 00 to 15 SECTION 4
m+1 Beginning word of
operating data area 00 to 15
m+2 Axis parameter
designation 00 to 15
Name Model Operating memory area Bit Details
X
axis
Y
axis
Z
axis
U
axis
Override
Enable Bit NC4
@
3
NC2 @ 3
NC1 @ 3
n
n
n
n+2
n+2
n+4 n+6 14 1: Enable; 0: Disable
Name Model Operating data area Bit Data configuration
X
axis
Y
axis
Z
axis
U
axis
Speed NC4 @ 3
NC2
@
3
NC1 @ 3
I+10
I+11
I+10
I+11
I+10
I+11
I+22
I+23
I+22
I+23
I+34
I+35 I+46
I+47 00 to 15
(rightmost)
00 to 15
(leftmost)
Override NC4 @ 3
NC2
@
3
NC1 @ 3
I+17
I+17
I+17
I+29
I+29
I+41 I+53 00 to 15
15 00 Leftmost 15 00 Rightmost
Setting range:
1 to 7A120 Hex
(1 to 500,000 pps)
15 00
Override (%)
Set the override in the range
0001 to 03E7 Hex (1 to 999%).