![background image](http://html1.mh-extra.com/html/omron/cs1w-213-rev-02-2008/cs1w-213-rev-02-2008_operation-manual_742355355.webp)
330
Error Code Lists
Section 11-5
Multiple axis
start
Multiple axis
start
8000
One of the following commands was exe-
cuted while the Data Transferring Flag was
ON:
DATA WRITE, DATA READ, or DATA SAVE
Correct the lad-
der program so
that data trans-
fer (read or write)
or data save
operation is not
executed while
the Data Trans-
ferring Flag is
ON. Execute the
data transfer or
data save opera-
tion again.
The command
will not be exe-
cuted.
If the last com-
mand made
before the error
was START,
INDEPENDENT
START, ORIGIN
SEARCH, ORI-
GIN RETURN,
JOG, ABSO-
LUTE MOVE-
MENT,
RELATIVE
MOVEMENT, or
INTERRUPT
FEEDING, the
axis with the
error will be
decelerated to a
stop.
When interpola-
tion operation is
being used, all
interpolated axes
will be deceler-
ated to a stop.
If the error is
generated dur-
ing data transfer
(read or write) or
data saving, all
axes will be
decelerated to a
stop.
Any operating
axes not speci-
fied above will
not be affected.
Group
Name
Code
Cause
Clearing
method
Operation after
error
Summary of Contents for CS1W-213 - REV 02-2008
