Omron CS1W-213 - REV 02-2008, Operation Manual

Page: 289 / 401

264
Memory Operation Section 10-2
the CX-Programmer, Programming Console and so on to input the ladder
program to the CPU Unit.
7. Checking
Check the operation of each program example.
List of Program Examples
10-2 Memory Operation
10-2-1 Checking Positioning Operations
Overview
• The operation of each positioning sequence can be tested using INDE-
PENDENT START under memory operation.
• Positioning is executed one positioning sequence at a time with INDE-
PENDENT START, according to the contents of each sequence.
• When using INDEPENDENT START, positioning is stopped after the com-
pletion of each positioning sequence, without reference to the completion
code set for that sequence.
Operation Examples
The following examples show positioning tests on positioning sequences with
completion codes set either to automatic or continuous.
Name Page
Memory operation Checking positioning operations 264
Repeat operation 269
Cancelling positioning 273
Direct operation Positioning with positions in the DM
Area 279
Inching 282
Linear interpolation Two-axis linear interpolation 285
Origin search Origin search using limit input 291
Override Changing speed during pulse output 294
Transferring and saving data Copying data 297
Operation
starts Operation
starts Operation
starts Operation
starts
Speed (pps)
Checking
operation
X axis
starts
Speed (pps)
Normal
operation
X axis
Operation