05/16 Rev. 03
USER- / SERVICE MANUAL
Info-Printouts & Parameters
AP 5.4 Gen II – AP 5.6
AP 4.4 – AP 5.4
64-xx – DPM – PEM – ALX 92x – ALX 73x (PMA)
133
ZPL PARAMETERS
This section lists the ZPL II
®
commands that the printer can interpret with any
special notes, if applicable.
This menu appears only with
SYSTEM PARAMETER > Print Interpret.
set to „ZPL
Emulation“ or „EasyPlug/ZPL Emu“.
ZPL is not supported in Standalone Mode.
Recommended settings:
SYSTEM PARMETER > RAM disk size
at least 2048 Kbytes
SYSTEM PARAMETER > Free store size
at least 4 MB
Darkness
64-xx
ALX 92x
DPM
PEM
ALX 73x (PMA)
AP 4.4
AP 5.4
AP 5.6
Print contrast for ZPL printjobs. This setting is modified by printjobs which
contain print contrast information. The print contrast set by
SYSTEM PARAMETERS > Print contrast
is not influenced by this setting.
xx
Setting range: 0-30; Step width: 1; Default setting: the Easy-Plug setting is
overtaken.
Control Prefix
64-xx
ALX 92x
DPM
PEM
ALX 73x (PMA)
AP 4.4
AP 5.4
AP 5.6
Indicates the start of a ZPL control instruction.
xxH
Default: xx = 7E (0x7E = „Tilde“)
Format Prefix
64-xx
ALX 92x
DPM
PEM
ALX 73x (PMA)
AP 4.4
AP 5.4
AP 5.6
Indicates the start of a ZPL format instruction.
xxH
Default: xx = 5E (0x5E = „Caret“)
Delimiter Char
64-xx
ALX 92x
DPM
PEM
ALX 73x (PMA)
AP 4.4
AP 5.4
AP 5.6
Used as a parameter place marker in ZPL format instructions.
xxH
Default: xx = 2C (0x2C = „Comma“)
Summary of Contents for ALX 92x
