Novexx Solutions ALX 92x, Service Manual

Page: 755 / 824

04/16 Rev. 11 USER + SERVICE MANUAL /Status Reports
64-xx – DPM – PEM – ALX 73x (PMA) – LPA 81x (Printer) – ALX 92x – AP 5.4 – AP 5.6
66
8201 Font downl. full
Status The font download buffer is full.
Measure  Allocate more memory for the download buffer using the parameter
SYSTEM PARAMETERS > Font downl. area .

Rename some speedo-fonts on the CompactFlash-Card, you actually don´t
use. All speedo-fonts named fontxxx.spd (xxx = font no.) are being loaded
into the font download buffer while system startup.

For Details refer to the manual „Cards“, subject section „Using cards“,
paragraph „memory card“.
8202 Font deleted
Status Attempt to access a font, which is no longer available on memory card or
on RAM disk (font was deleted or renamed).
Measure  Check the label layout. Load the not available font or use another,
available, font.
8300 Bar code corr.
Status Error: a bar code correction factor greater than +/- 25% has been selected.
Measure  Reduce correction factor.
8301 Bar code data
Status Incorrect bar code data. The bar code data is not permitted for the selected
bar code type.
Measure

Use data permitted for the bar code type.
8302 Barcode checksum
Status Error during calculation of the bar code check sum.
Measure  Check transmitted data.
 If the error continues to occur please contact the manufacturer. Send the
transmitted Easy Plug data.
8303 Bar code sample
Status Error during calculation of the bar code sample.
Measure  Check whether the transmitted data is permitted for the bar code type; if
necessary alter the data.
8304 Bar c. plain-copy
Status Error during integration of the plain-copy line in the bar code sample.
Measure  Check whether the transmitted data is permitted for the bar code type; if
necessary alter the data.