Novexx Solutions ALX 92x, Service Manual

Page: 631 / 824

05/16 Rev. 03 USER- / SERVICE MANUAL Info-Printouts & Parameters
AP 5.4 Gen II – AP 5.6 AP 4.4 – AP 5.4 64-xx – DPM – PEM – ALX 92x – ALX 73x (PMA)
109
Multi label mode
ALX 92x DPM

Only works if a singlestart connector or an USI is used as signal input - it
doesn´t work, if an AI is applied as signal input.
Off Each start signal causes printing of one label.
x labels/start Each start signal causes printing of x labels; x = [2…20];
x > 3: The distance of all following labels after the 2nd label matches the val-
ue set in
DISPENSER PARA
> Label 2 offset
.
Label 2 offset
ALX 92x DPM

Only if
DISPENSER PARA > Multi label mode
= „x labels/start“
Defines the distance of the 2nd label and of all following labels, if x > 3 (see
DISPENSER PARA > Multi label mode ). The distance is measured from the front la-
bel edge of the preceding label.
x mm Setting range: x…9999.9 mm; Default: x, with x = DISPENSER PARA >
Label pitch
.
Label 3 offset
ALX 92x DPM

Only if
DISPENSER PARA > Multi label mode
= „
3 labels/start
“
Defines the distance of the 3rd label for the
DISPENSER PARA > Multi label mode
parameter (see above). The distance is measured from the front label edge
of the preceding label.
x mm Setting range: x…9999.9 mm; Default: x, with x = DISPENSER PARA >
Label pitch
.