Novexx Solutions ALX 92x, Service Manual, Page: 766 / 824

04/16 Rev. 11 USER + SERVICE MANUAL /Status Reports
64-xx – DPM – PEM – ALX 73x (PMA) – LPA 81x (Printer) – ALX 92x – AP 5.4 – AP 5.6
77
9039 Ribbon mode chg.
Status The ribbon mode was changed between two consecutive printjobs via
Easy-Plug command (from thermal transfer to thermo or vice-versa).
Measure

Check the ribbon mode setting and, if necessary, change the setting
( SYSTEM PARAMETERS > Ribbon autoecon. ).
9040 No Time Server
Status Comes up one times at startup, if
INTERFACE PARA > NETWORK PARAM. > Time
client
is set to “On” and there is no response from the set time server.
Measure

Check the time server availability respectively the time server settings.
9100-9119 Messages during firmware update
9100 Invalid format
Status Occurs during a download. The sent data is faulty, e. g. regarding an
•
invalid data format
•
invalid check sum
•
invalid address
•
invalid record type
Measure  Switch printer off and on again. Check the download data.
9101 Invalid Header
Status Occurs during a download. The sent files have a format error in the header.
Measure

Switch printer off and on again. Check the download data.
9102 Inv.Board Rev.
Status Occurs during a firmware download. The sent firmware does not match the
version of the CPU board.
Measure  Switch printer off and on again. Check the download data.
9103 Inval. firmware
Status Occurs during a firmware download. The sent firmware does not match the
installed CPU board.
Measure  Switch printer off and on again. Check the firmware file.
9104 Inv. Data Size
Status Occurs during a download. The size of the sent data doesn´t match the file
size indicated in the header.
Measure

Switch printer off and on again. Check the download data.
9107 Flash Overflow
Status Occurs during a download. The flash memory on the CPU board is full. No
more data can be loaded.
Measure

Switch printer off and on again.