Novexx Solutions ALX 92x, Service Manual

Page: 682 / 824

05/16 Rev. 03 USER- / SERVICE MANUAL Info-Printouts & Parameters
AP 5.4 Gen II – AP 5.6 AP 4.4 – AP 5.4 64-xx – DPM – PEM – ALX 92x – ALX 73x (PMA)
160
Head strobes
64-xx ALX 92x DPM PEM ALX 73x (PMA) AP 4.4 AP 5.4 AP 5.6
Shows the counted head strobes, which are a measure for the service life of
the printhead. A strobe is counted for each line in which at least one dot ist
printed. Maximum value: 4 billions.
Head temperature
64-xx ALX 92x DPM PEM ALX 73x (PMA) AP 4.4 AP 5.4 AP 5.6
Shows the current printhead temperature in °C.
Foil diameter
64-xx ALX 92x DPM PEM ALX 73x (PMA) AP 4.4 AP 5.4 AP 5.6
Shows the calculated foil diameter: A measurement routine calculates the ac-
tual ribbon roll diameter with an exactness of 7.5%.
The parameter
SYSTEM PARAMETER > Foil end warning
can be used to set a critical
foil roll diameter. If the foil roll diameter equals this value, a message appears
on the printer display.

See parameter Foil end warning  on page 72.
64-xx, DPM / PEM, ALX 92x:
At the (optional) USI is set a signal indicating the near foil end (additionally to
the display warning).
Dispensing cycl.
(Dispensing cycles)
64-xx ALX 92x DPM AP 5.4 AP 5.6

64-xx AP 5.4 /5.6 : Dispenser version only.
Shows the number of dispensed labels.
Operation time
64-xx ALX 92x DPM PEM ALX 73x (PMA) AP 4.4 AP 5.4 AP 5.6
Shows the elapsed time since the last switch-on of the machine.