Novexx Solutions ALX 92x, Service Manual

Page: 659 / 824

05/16 Rev. 03 USER- / SERVICE MANUAL Info-Printouts & Parameters
AP 5.4 Gen II – AP 5.6 AP 4.4 – AP 5.4 64-xx – DPM – PEM – ALX 92x – ALX 73x (PMA)
137
Command ^JM
64-xx ALX 92x DPM PEM ALX 73x (PMA) AP 4.4 AP 5.4 AP 5.6

Interpreter version: 1.32 or higher
The ^JM command changes the printer resolution:
•
^JMA sets the resolution to the default value = printhead resolution.
•
^JMB sets the resolution to 200 dpi, if the actual resolution is 300 dpi. If the
actual resolution is 200 dpi, this command is ignored.
Disable
The resolution setting sent in the ZPL printjob is ignored.
Enable
The resolution setting is not ignored.
Command ^MD/
~
SD
64-xx ALX 92x DPM PEM ALX 73x (PMA) AP 4.4 AP 5.4 AP 5.6
The ZPL commands ^MD and
~
SD (set printhead darkness value) are pro-
cessed optionally.
Enable ^MD- and
~
SD are processed.
Disable ^MD- and
~
SD are ignored.