Novexx Solutions ALX 92x, Service Manual

Page: 602 / 824

05/16 Rev. 03 USER- / SERVICE MANUAL Info-Printouts & Parameters
AP 5.4 Gen II – AP 5.6 AP 4.4 – AP 5.4 64-xx – DPM – PEM – ALX 92x – ALX 73x (PMA)
80
[16] Dot check area (=Dottestarea) of the printer (schematic).
Dottestarea to
64-xx ALX 92x DPM PEM

Only if
SYSTEM PARAMETER > Autom. dot check
= „Continuous“.
Upper border of the dot check area. The value sets the distance in mm to the
left print head end, looked at on the print head from above.
x mm
Setting range: refer to Tab. 3; Unit interval: 1; Default setting: 0 mm
Print Interpret.
64-xx ALX 92x DPM PEM ALX 73x (PMA) AP 4.4 AP 5.4 AP 5.6
Easyplug
Printjobs written in the Easy-Plug command language can be interpreted.
Lineprinter Lineprinter (or similar to Lineprinter), print-out of the print command.
Hex Dump Print-out in hexadecimal format.
In Lineprinter and Hex Dump, commands are printed out in the form of a list
with the character set 12.

When setting Lineprinter or Hex Dump, Easy Plug commands which have
not yet been processed are deleted!
ZPL Emulation Printjobs written in the ZPL II
®1)
command language („ZPL“) can be interpre-
ted.

Firmware loading requires changing into EasyPlug first.
EasyPlug/ZPL Emu
Printjobs in EasyPlug and ZPL can be interpreted.
0m m 128 m m
von
from
bis
to
printhead
Dottestbereich
Dottestarea
Display 2x16
characters
1) ZPL II is a registered trademark of ZIH Corp.