Novexx Solutions ALX 92x, Service Manual

Page: 681 / 824

05/16 Rev. 03 USER- / SERVICE MANUAL Info-Printouts & Parameters
AP 5.4 Gen II – AP 5.6 AP 4.4 – AP 5.4 64-xx – DPM – PEM – ALX 92x – ALX 73x (PMA)
159
Roll run length
64-xx ALX 92x DPM PEM ALX 73x (PMA) AP 4.4 AP 5.4 AP 5.6
Shows the total "covered distance" of the print roller. The counter is reset with
each calling of the parameter
SERVICE FUNCTION > Roller exchange = yes
. Maximum
value: 4 billions.
Cuts on knife
64-xx AP 5.4 AP 5.6

Only with mounted and activated cutter.
Shows the number of cuts done by one knife. The counter is reset with each
calling of the parameter
SERVICE FUNCTION > Cutter exchange = yes
. Maximum value:
4 billions.
Tot. mat. length
64-xx ALX 92x DPM PEM ALX 73x (PMA) AP 4.4 AP 5.4 AP 5.6
Shows the total "covered distance" of the feed roller. In comparison to the
counter Roll run length, this counter is not reset after a roller exchange. Max-
imum value: 4 billions.
Tot. foil length
64-xx ALX 92x DPM PEM ALX 73x (PMA) AP 4.4 AP 5.4 AP 5.6
Shows the total "covered distance" of the ribbon roller.
Total cuts
64-xx AP 5.4 AP 5.6

Only with mounted and activated cutter.
Shows the number of cuts done by all knifes. In comparison to the counter
Cuts on knife, this counter is not reset after a knife exchange. Maximum val-
ue: 4 billions.
Total head moves
64-xx ALX 92x DPM PEM

Only with mounted and activated cutter.
Shows the counter for every up and down movement of the printhead. Maxi-
mum value: 4 billions.