Novexx Solutions ALX 92x, Service Manual

Page: 207 / 824

06/16 Rev. 09 SERVICE MANUAL Service Mechanics
DPM – PEM – ALX 92x
9
Front hood
Tools
•
Torx screwdriver T20, 20 cm long
•
Small screwdriver
•
Allen key 2.5 mm.
Dismantling
1. Open up the front hood [4].
2. Unscrew hood switch [4A]

If there is a Sub-D applicator , unscrew
the plug board [4B].
3. Undo Torx screws[4C] (7 screws). Take off
the front hood.
Assembly

To assemble the device, follow the steps in
the reverse order.
DPM rear hood
Before dismantling the rear hood, the po-
wer supply, USI board and CPU board
connected to the rear hood must be remo-
ved.
Tools
•
Torx screwdriver size 20
•
Allen key 2.5 mm.
Dismantling
1. Remove two screws on the top and bottom
of the rear hood [5A] [6A] and three on the
lateral part [5B].

(continued on the next page)
[4] Front hood, seen from below and to the side.
A Hood switch
B Mounting plate for Sub-D connection
C Front hood fastening screw
A
B
C
[5] DPM rear hood.
A
B
A
[6] Underside of front hood.