Novexx Solutions ALX 92x, Service Manual, Page: 729 / 824

04/16 Rev. 11 USER + SERVICE MANUAL /Status Reports
64-xx – DPM – PEM – ALX 73x (PMA) – LPA 81x (Printer) – ALX 92x – AP 5.4 – AP 5.6
40
Measure 2
1. Press the Cut button to deactivate the acoustic signal.
2. Press the Feed button in order to acknowledge the status report.
Display: OFFLINE x JOBS
3. Insert a new ribbon.
4. Press the Online button: processing of the job continues, gap LS is
reinitialised.
5009 USI start error
Status This status message can only be triggered with activated parameter
DP INTERFACE > Start error stop
. It occurs, if another start signal is given while
printing a label.
Measure

Acknowledge by pressing the Online button. Press the Feed button
afterwards to proceed with the print job.
5012 Delete H8 loader
Status Error while loading the H8 firmware: the old firmware on the machine could
not be deleted.
Measure

Acknowledge by pressing the Online button.

Retry loading the firmware.
 If the error occurs repeatedly, the bootloader must be loaded newly.
5013 Prog H8 loader
Status Error while loading the H8 firmware: the new firmware could not be written.
Measure  Acknowledge by pressing the Online button.

Retry loading the firmware.

If the error occurs repeatedly, the bootloader must be loaded newly.
5014 Power
Measure  Acknowledge by pressing the Online button.