Novexx Solutions ALX 92x, Service Manual, Page: 267 / 824

06/16 Rev. 09 SERVICE MANUAL Service Mechanics
DPM – PEM – ALX 92x
69
Assembly
To assemble the device, follow the steps in
the reverse order. Assure the following:

Spacer sleeves behind the rear materi-
al guide:
– ALX, DPM: each axle 1x A3629 (6.7 mm)
– PEM: rear axle: 1x A3629 (6.7 mm), front
axle: 1x A7650 (3.5 mm)

Tightening torque for setting screw in
the inner material guide: 20 Ncm .

PEM, front axle: Insert a spacer ring on
each side between pressure roller wing
and bearing plate [139A] [140C].
[139] Parts arrangement at the front axle, PEM LH, outer side:
A Aluminium ring (3.5 mm, A7650)
B Pressure roller wing
C Retaining ring
[140] A Inner material guide at a PEM LH (feeding module dis-
mantled)
B Pressure roller wing
C Aluminium ring 3.5 mm (A7650)
D Aluminium ring 6.7 mm (A3629)
A
B
C
A
C
D
B