Novexx Solutions ALX 92x, Service Manual

Page: 122 / 824

06/15 Rev. 5.08-01 USER MANUAL Internal Fonts
All printers
3
Parameter settings
• The font parameter must be set to „IBM“ (=default setting) (Tab. 2).
• The optional character filter suppresses characters < 20 hex. If you want to print
those characters, switch the character filter off (Tab. 2).
Refer to topic section „Info-printouts and parameters“ for detailed information on
parameters.
Fixfonts and Speedo fonts
Use the Easy Plug command „YT“ for fixfonts and „YN“ for Speedo fonts to print text
with internal fonts.
For more information on Easy Plug commands refer to the Easy Plug Manual, topic
section
Description of commands

.
Customized Fonts
Prerequisites

Only with 64-xx Gen. 3
Starting with firmware version 5.02, customized fonts can be loaded separately into
the flash memory.
Prerequisites:
• At least 4 MB flash memory are available.
• Free flash memory of the required amount.
Loading fonts
Files with customized fonts can be ordered at Novexx Solutions. Such font files carry
the extension *.s3b (as firmware files) and have to be loaded in the same way as firm-
ware files.

Firmware version before 3.00 (32Bit) or 4.00 (64Bit) respectively provided the in-
ternal fonts in separate *.s3b files. Those files can not be used with firmware versions
5.02 and above!
Refer to the service manual, topic section
Firmware

.
Printer Parameter Setting
TTX x50
TTX 67x
TDI
SYSP > NACH
IBM
IFAC > <20H No
64-xx
DPM
PEM
ALX 92x
ALX 73x
(printer)
AP 4.4
AP 5.4
AP 7.t
SYSTEM PARAMETERS > Character sets
IBM
SYSTEM PARAMETERS > Character filter
All character
[Tab. 2] Necessary parameter-settings to get all listed characters printed.