Novexx Solutions ALX 92x, Service Manual, Page: 705 / 824

04/16 Rev. 11 USER + SERVICE MANUAL /Status Reports
64-xx – DPM – PEM – ALX 73x (PMA) – LPA 81x (Printer) – ALX 92x – AP 5.4 – AP 5.6
16
1101 Wrong time/date
Status Easy-Plug command #RTC (set realtime clock): unvalid date or wrong
date/time format.
Measure

Check command #RTC in the current printjob.

Please read the notes in section Easy-Plug errors  .
1110 Opening Bracket
Status General software error
Measure  Switch printer off and then back on again after thirty seconds.

Please read the notes in section General software errors  .
1111 Closing Bracket
Status General software error
Measure  Switch printer off and then back on again after thirty seconds.
 Please read the notes in section General software errors  .
1112 Para: No Value
Status General software error
Measure

Switch printer off and then back on again after thirty seconds.
 Please read the notes in section General software errors  .
1113 No Default Value
Status General software error
Measure  Switch printer off and then back on again after thirty seconds.

Please read the notes in section General software errors  .
1114 < Limit value
Status A sent Easy Plug command contains a value which exceeds the admissible
range at the bottom limit. The faulty value is replaced automatically by a
default value matching the limits.
Example: #YT109/-1/. The value –1 has been assigned to the parameter d.
Admissible for d are the values 0, 1, 2, 3. Therefore, -1 exceeds the value
range at the bottom limit.
Measure  Check the Easy Plug command on admissible values and correct them if
necessary.

Please read the notes in section Easy-Plug errors  .