Novexx Solutions ALX 92x, Service Manual, Page: 703 / 824

04/16 Rev. 11 USER + SERVICE MANUAL /Status Reports
64-xx – DPM – PEM – ALX 73x (PMA) – LPA 81x (Printer) – ALX 92x – AP 5.4 – AP 5.6
14
1033 Uninit flash par
Status General software error
Measure  Switch printer off and then back on again after thirty seconds.

Please read the notes in section General software errors  .
1034 Uninit restrict
Status A „restricted string“ parameter could not be initialized.
Measure  Switch printer off and then back on again after thirty seconds.
 Please read the notes in section General software errors

.
1035 Uninit combi
Status General software error. A combi parameter could not be initialized.
Measure

Confirm by pressing the Online button.
 Please read the notes in section General software errors  .
1036 Wrong combi para
Status General software error. A combi parameter could not be initialized.
Measure

Confirm by pressing the Online button.

Please read the notes in section General software errors  .
1037 Software error
Status General software error
Measure  Switch printer off and then back on again after thirty seconds.
 Please read the notes in section General software errors

.
1038 Software error
Status General software error
Measure  Switch printer off and then back on again after thirty seconds.
 Please read the notes in section General software errors  .
1087 OLV not active
Status OLV- specific Easy Plug commands have been used (#OLVI or #OLVD),
without having set the printer to OLV use at first.
Measure  Set the printer to OLV use.

See parameter
INTERF. PARAM > COM2 PORT > Function Option
.
1088 No realtimeclock
Status RTC-specific Easy Plug commands have been used (#YS or #YC), without
having a RTC installed.
Measure

Install a RTC.

For details refer to the Service Manual, topic section "General Service",
chapter "Assembling accessories" / "Option board".