Novexx Solutions ALX 92x, Service Manual, Page: 545 / 824

1. Only 64-xx dispenser with 4“ printhead 2. Only if SYSTEM PARAMETER > Ribbon autoecon. = „On“, „On Turbo“ or „Thermal/headlift“ 3. Only with 8-Dot-Emulation 4. Only with 64-08 5. Only with rewinder option 6. Only with cutter 7. Only
with USI interface 8. Only if SYSTEM PARAMETER > Gap detect. mode = Autom. feed back 9. Only with at least one data block stored in the flash memory 10. Only if SYSTEM PARAMETER > Print Interpret. = „ZPL Emulation“ 11. Only with I/
O board 12. Only if PRINT PARAMETERS > Punch mode = Manual 13. Only in production mode 14. Only with 64-xx dispenser 15. Only if SYSTEM PARAMETER > Autom. dot check = Continuous 16. For details read parameter description 17.
Only with 64-04/05/06 18. Only with installed RFID option 19. Only if DP INTERFACE > Interface type = USI Applicator 20. Only with SYSTEM PARAMETER > Dispensing edge = „User defined“ 21. Not with 64-xx dispenser 22. Only with an
activated RFID option 24. With connected remote display only 25. With Applicator Interface only 26. Only OLV option activated 27. Depends on the applicator type 28. Only if INTERFACE PARA > NETWORK PARAM. > WEB server = „On“ 29.
Availability depends on device conf. 30. Only with a CF card inserted 31. Only with a WLAN CF card inserted 32. Only if INTERFACE PARA > NETWORK PARAM. > Time client = „On“ 33. Only if SYSTEM PARAMETER > Periph. device = „Tear-
off edge“ 34. Only if SYSTEM PARAMETER > Periph. device = „Dispenser“ 35. Only if DISPENSER PARA > Transport mode = „Dual motors“ 36. Only if DISPENSER PARA > Speed Adaption = „On“ 37. Only if DISPENSER PARA > Multi label
mode = „x labels/start“ 38. Only if DISPENSER PARA > Multi label mode = „3 labels/start“ 39. Only PEM 39. Only if CPU board index is -06 or lower
05/16 Rev. 03 USER- / SERVICE MANUAL Info-Printouts & Parameters
64-xx – DPM – PEM – ALX 92x – ALX 73x (PMA)
23
ALX
73
x (P
MA)
Pa
ra
m
et
er
s
(System Param. cont.)
DP INTERFACE 7 ZPL PARAMETERS 10 I/O BOARD PARA 11 SPECIAL FUNCTION SERVICE FUNCTION
Mat. end detect. Interface type 7 Version 10 Start print mode 11 Printer type 13 Service 13
Periph. device 13/16 Start print mode 7 Darkness 10 Reprint Signal 11 Printhead type 13 Head exchange 13
Print contrast End print mode 7 Control Prefix 10 Feed 11 Sensor type 13 Roller exchange 13
Ram disk size Reprint signal 7 Format Prefix 10 Pause input 11 Command Sequence 13 Serv. data reset 13
Font downl. area Ribbon signal 7 Delimiter Char 10 Error output 11 Delete job Head dot test
Free store size Material signal 7 Label Top 10 Error polarity 11 Delete spooler Head step tune 13
Print info mode Feed input 7 Left Position 10 Status output 11 Factory settings EasyPlug monitor 13
Language Pause input 7 Manual Calibrate 10 Status polarity 11 Custom defaults 13 EP Monitor Mode 13
Keyboard Start error stop 7 Resolution 10 End print mode 11 Store Parameters Head adjust
Signal / buzzer Internal inputs 7 Error Indication 10 Store Diagnosis Sensor adjust 13
Access authoriz. Apply mode 19 Error Checking 10 Gen.Support Data Sensor test
Realtime clock USI profile 26 305 DPI Scaling 10 EasyPl. file log 30 Cutter test
Warning signal 7 Image Save Path 10 Log files delete 30 Matend tolerance
Command ^PR 10 Data blocks del. 9 Feedadjust label
Command ^MT 10 Feed adjust
Label Invert 10 Foil feed adjust 13
Command ^JM 10 Punch Y calibr. 13
PS register 13
Scanner test
Memory card test
Send test
Receive test
Print test
F
W
6.60