Novexx Solutions ALX 92x, Service Manual

Page: 85 / 824

04/16 Rev. 06 USER MANUAL Advanced Applications
AP 4.4 – AP 5.4 – AP 5.6 – AP 7.t – 64-xx – DPM – PEM – ALX 92x
10
Features
Standalone operation in brief:
• Printing without computer connection
• Data entry via control panel or keyboard
• Reading print job from the memory card
• Entry or selection of field content
• Updating Firmware from memory card
Selecting files from memory card
Requirements
The card slot which is used for standalone operation must provide the drive letter C.
64-xx, DPM, PEM, ALX 92x
1
:
 Set
INTERF.PARAM. > DRIVEASSIGNMENT > Drive C
to „Compact flash“ or „Compact
flash 2 “ („Compact flash 2“ appears only with the optional 2
nd
card slot).
AP 5.4 Gen. 2, AP 5.6:
 Set INTERF.PARAM. > DRIVEASSIGNMENT > Drive C to „SD/MMC card“ (= factory set-
ting).
Other printers: No settng required
Selectable are files with the following extentions:
• „*.FOR“ (printjob)
• „*.S3B“ (firmware)

The files must be stored on memory card in folder
\FORMATS
.

If no file with one of the above listed endings is found in folder
\FORMATS
, or if no
memory card is inserted, the following message appears:

If a huge amount of printjob files is stored in folder
\FORMATS
, this can lead to the
following status message:
To remedy the cause of this message, take one (or both) of the following measures:
• Reduce the number of files in the
\FORMATS
folder
• Increase the amount of assigned memory in
SYSTEM PARAMETER > Free store size
Selecting a file
1. Press the Esc buttons to get into the standalone mode. The following is
displayed:
„Novexx.for“ stands for any printjob file, which is stored in the
\FORMATS
folder.
Assumption: More than one file is stored in the
\FORMATS
folder: In this case the
first file in alphabetical order is displayed.
2. Press the Cut or Feed button to step to the next file.

Press the Esc button to jump back to the first entry of the list.
1) With firmware version 5.32 or higher (each Gen. 3)
Standalone
No files!
Status num: 8857
Wrong mem config
Choose a file
Novexx.for