Novexx Solutions ALX 92x, Service Manual

Page: 662 / 824

05/16 Rev. 03 USER- / SERVICE MANUAL Info-Printouts & Parameters
AP 5.4 Gen II – AP 5.6 AP 4.4 – AP 5.4 64-xx – DPM – PEM – ALX 92x – ALX 73x (PMA)
140
Delete job
64-xx ALX 92x DPM PEM ALX 73x (PMA) AP 4.4 AP 5.4 AP 5.6
Press the Online-key to cancel the active print job.
Delete spooler
64-xx ALX 92x DPM PEM ALX 73x (PMA) AP 4.4 AP 5.4 AP 5.6
Press the Online-key to delete all print jobs contained in the spooler.
Factory settings
64-xx ALX 92x DPM PEM ALX 73x (PMA) AP 4.4 AP 5.4 AP 5.6
All parameters are preset ex works to values specific to each device type.
These factory settings can be restored at any time.

All parameters are then overwritten by the factory settings.

All data present in the spooler, including data belonging to an interrupted
print job, is deleted!
No
(Default) No factory setting.
Custom defaults
If custom parameter settings were stored before (see parameter
Custom de-
faults ), those are restored.

„Custom defaults“ only appears, if custom settings have already been
stored.
Factory defaults
The parameters are set to factory defaults.
Custom defaults
64-xx ALX 92x DPM PEM ALX 73x (PMA) AP 4.4 AP 5.4 AP 5.6

Parameter appears only in production mode.
Apply current
Stores the current parameter settings as values for the default setup. Those
settings are restored by calling parameter
SPECIAL FUNCTION >
Factory settings =
„Custom defaults“.
Delete
Deletes the stored custom default settings. „Delete“ is only visible, if settings
have already been stored.
Delete Job
Clearing . . .
Delete Spooler
Clearing . . .