Novexx Solutions ALX 92x, Service Manual, Page: 568 / 824

05/16 Rev. 03 USER- / SERVICE MANUAL Info-Printouts & Parameters
AP 5.4 Gen II – AP 5.6 AP 4.4 – AP 5.4 64-xx – DPM – PEM – ALX 92x – ALX 73x (PMA)
46
EAN sep. lines
64-xx ALX 92x DPM PEM ALX 73x (PMA) AP 4.4 AP 5.4 AP 5.6
EAN separation lines. Parameter for controlling of EAN or UPC barcodes if
they are printed without readline.
With readl. only (Default) The separation bars at the beginning, middle, and the end of the
barcode are only long, if the barcode is printed with a readline.
Always long The separation bars at the beginning, middle, and the end of the barcode are
always long, regardless if the barcode is printed with or without readline. The
position of the barcode is the same as with the readline option switched on.
Dispense Mode
64-xx ALX 92x DPM AP 5.4 AP 5.6
Governs the run of the print-dispense procedure.

Only if
SYSTEM PARAMETER
> Periph. device = „Tear-off edge“.

The ribbon autoeconomy function can only be used in "Real 1:1 Mode"!
Dispense only With this setting, the printer can be used as a mere dispenser without pro-
cessing print jobs. Set the material length before you use this function.
See parameter
PRINT PARAMETERS > Material length
.
After calling "Dispense only", the printer restarts; afterwards, the following is
displayed:
The parameters menu can be activated as usual after having switched to the
offline mode by pressing the Online button two times.
Normal 1:1 Mode
•
The printer cannot print on the whole label surface. A stripe at the label
beginning stays unprinted.
•
The label is being dispensed while printing.
•
The output volume is at its maximum level.

The width of the unprintable stripe is calculated as follows:
Distance print line to dispensing edge + Dispense position (see [4])

Also refer to parameter
PRINT PARAMETERS > Dispense position
.

A graphic can be found under
PRINT PARAMETERS > Cut mode > Normal 1:1 mode
.
Dispense only
Labels 0 0 = Number of dispensed labels.
Printer Distance print line - dispensing edge
64-xx 39.8 mm (long dispensing edge)
24.2 mm (short dispensing edge)
AP 5.4 25.0 mm
[5] Distances between print line and dispensing edge for some printers.