Novexx Solutions ALX 92x, Service Manual

Page: 535 / 824

1. Only 64-xx dispenser with 4“ printhead 2. Only if SYSTEM PARAMETER > Ribbon autoecon. = „On“, „On Turbo“ or „Thermal/headlift“ 3. Only with 8-Dot-Emulation 4. Only with 64-08 5. Only with rewinder option 6. Only with cutter 7. Only
with USI interface 8. Only if SYSTEM PARAMETER > Gap detect. mode = Autom. feed back 9. Only with at least one data block stored in the flash memory 10. Only if SYSTEM PARAMETER > Print Interpret. = „ZPL Emulation“ 11. Only with I/
O board 12. Only if PRINT PARAMETERS > Punch mode = Manual 13. Only in production mode 14. Only with 64-xx dispenser 15. Only if SYSTEM PARAMETER > Autom. dot check = Continuous 16. For details read parameter description 17.
Only with 64-04/05/06 18. Only with installed RFID option 19. Only if DP INTERFACE > Interface type = USI Applicator 20. Only with SYSTEM PARAMETER > Dispensing edge = „User defined“ 21. Not with 64-xx dispenser 22. Only with an
activated RFID option 24. With connected remote display only 25. With Applicator Interface only 26. Only OLV option activated 27. Depends on the applicator type 28. Only if INTERFACE PARA > NETWORK PARAM. > WEB server = „On“ 29.
Availability depends on device conf. 30. Only with a CF card inserted 31. Only with a WLAN CF card inserted 32. Only if INTERFACE PARA > NETWORK PARAM. > Time client = „On“ 33. Only if SYSTEM PARAMETER > Periph. device = „Tear-
off edge“ 34. Only if SYSTEM PARAMETER > Periph. device = „Dispenser“ 35. Only if DISPENSER PARA > Transport mode = „Dual motors“ 36. Only if DISPENSER PARA > Speed Adaption = „On“ 37. Only if DISPENSER PARA > Multi label
mode = „x labels/start“ 38. Only if DISPENSER PARA > Multi label mode = „3 labels/start“ 39. Only PEM 39. Only if CPU board index is -06 or lower
05/16 Rev. 03 USER- / SERVICE MANUAL Info-Printouts & Parameters
64-xx – DPM – PEM – ALX 92x – ALX 73x (PMA)
13
64-xx
Pa
ra
m
et
er
s
(System Param. continued)
DISPENSER PARA 14 I/O BOARD PARA 11 OLV PARAMETERS 26 DP INTERFACE 7 ZPL PARAMETERS 10
Mat. end detect. Dispense mode 14 Start delay 11 Verify mode 26 Interface type 7 Version 10
Periph. device Dispenseposition 14 Reprint Signal 11 Cancel. printing 26 Start print mode 7 Darkness 10
Singlestartquant Display mode 14 Feed input 11 Reprint quantity 26 End print mode 7 Control Prefix 10
Head disp dist 20 Dispense counter 14 Pause input 11 OLV mode 26 Reprint signal 7 Format Prefix 10
External signal Dispensing mode 14 Error output 11 Ref Decode 26 Ribbon signal 7 Delimiter Char 10
Start print mode Application mode 14 Error polarity 11 Decodability 26 Material signal 7 Label Top 10
Apply key 13 Start source 14 Status output 11 Modulation 26 Feed input 7 Left Position 10
Print contrast Dispensing edge 14 Status polarity 11 Defects 26 Pause input 7 Manual Calibrate 10
Ram disk size Max InitFeedback 14 End print mode 11 Edge Contrast 26 Start error stop 7 Resolution 10
Font downl. area Transport mode 14 Rmin/Rmax 26 Internal inputs 7 Error Indication 10
Free store size Start offset 14 Symbol Contrast 26 Apply mode 7/19 Error Checking 10
Print Info Mode Start error stop 14 PCS 26 USI profile 7 305 DPI Scaling 10
Reprint function Product length 14 R (white) 26 Warning signal 7 Image Save Path 10
Language Forw feed rat. 14/35 R (black) 26 Command ^PR 10
Keyboard Backw feed rat. 14/35 Ratio 26 Command ^MT 10
Signal / buzzer ANSI Symbolgrade 26 Label Invert 10
Access authoriz. Dist. head-beam 26 Command ^JM 10
Realtime clock
F
W
6.60