Novexx Solutions ALX 92x, Service Manual

Page: 399 / 824

06/16 Rev. 04 SERVICE MANUAL Service Electronics Gen. 3
64-xx Gen. 3 – DPM Gen. 3 – PEM – ALX 92x Gen. 3 – ALX 73x (PMA)
30
Signal description of the internal inputs at CN300
Pin Signal Signal
type Function
1
OD control
material In To be applied to the OD control material option.
The signal WARNING at pin 9 of the DB 15 is switched activ, if
•
Parameter
DP INTERFACE > Material Signal
= Activated a nd
•
the input is high
2
Applicator
fault home
position In
If one of the inputs is high or makes a low-high-transition, the ap-
propriate status message is displayed at the printer. Additionally,
the outputs ERROR\ and MACHINE STATUS\ will be activated
(low).
3
Applicator
fault touch
down In
4
PLC ready /
fault In
5
GND Ground GND potential of the internal inputs
[Tab. 7] Signal designations and functions of the internal inputs