Novexx Solutions ALX 92x, Service Manual

Page: 225 / 824

06/16 Rev. 09 SERVICE MANUAL Service Mechanics
DPM – PEM – ALX 92x
27
Completely dismantle the winder
5. Dismantle the ALX rear hood.

See chapter Rear hood (ALX) on page 12.
6. Unscrew nut [[53A]. The nut can be acces-
sed from below (between power supply
and base plate).
Rewinder motor (ALX)
Tools
Torx screwdriver size 20
Dismantling
1. Dismantle the drive belt.

See chapter Backing paper rewinder (ALX)
on page 26.
2. Dismantle the ALX rear hood.

See chapter Rear hood (ALX) on page 12.
3. Disconnect the motor from the cable lea-
ding to the output stage [54D].
4. Undo 4 screws [54B] and remove the
motor.
Assembly
To assemble the device, follow the steps in
the reverse order.

The cable comes out of the motor poin-
ting upwards.

Attach the motor to the free end of the
cable leading to the output stage [54D].

Relay and attach the cable, making
sure that it does not touch any moving
parts.
A
[53] Undo this nut (A) to completely dismantle the winder (ALX/
RH, power supply dismantled).
A
B
C
D
[54] Rewinder motor (C) and the related motor driver board (A)
(here: M4A).