Novexx Solutions ALX 92x, Service Manual

Page: 546 / 824

1. Only 64-xx dispenser with 4“ printhead 2. Only if SYSTEM PARAMETER > Ribbon autoecon. = „On“, „On Turbo“ or „Thermal/headlift“ 3. Only with 8-Dot-Emulation 4. Only with 64-08 5. Only with rewinder option 6. Only with cutter 7. Only
with USI interface 8. Only if SYSTEM PARAMETER > Gap detect. mode = Autom. feed back 9. Only with at least one data block stored in the flash memory 10. Only if SYSTEM PARAMETER > Print Interpret. = „ZPL Emulation“ 11. Only with I/
O board 12. Only if PRINT PARAMETERS > Punch mode = Manual 13. Only in production mode 14. Only with 64-xx dispenser 15. Only if SYSTEM PARAMETER > Autom. dot check = Continuous 16. For details read parameter description 17.
Only with 64-04/05/06 18. Only with installed RFID option 19. Only if DP INTERFACE > Interface type = USI Applicator 20. Only with SYSTEM PARAMETER > Dispensing edge = „User defined“ 21. Not with 64-xx dispenser 22. Only with an
activated RFID option 24. With connected remote display only 25. With Applicator Interface only 26. Only OLV option activated 27. Depends on the applicator type 28. Only if INTERFACE PARA > NETWORK PARAM. > WEB server = „On“ 29.
Availability depends on device conf. 30. Only with a CF card inserted 31. Only with a WLAN CF card inserted 32. Only if INTERFACE PARA > NETWORK PARAM. > Time client = „On“ 33. Only if SYSTEM PARAMETER > Periph. device = „Tear-
off edge“ 34. Only if SYSTEM PARAMETER > Periph. device = „Dispenser“ 35. Only if DISPENSER PARA > Transport mode = „Dual motors“ 36. Only if DISPENSER PARA > Speed Adaption = „On“ 37. Only if DISPENSER PARA > Multi label
mode = „x labels/start“ 38. Only if DISPENSER PARA > Multi label mode = „3 labels/start“ 39. Only PEM 39. Only if CPU board index is -06 or lower
05/16 Rev. 03 USER- / SERVICE MANUAL Info-Printouts & Parameters
64-xx – DPM – PEM – ALX 92x – ALX 73x (PMA)
24
ALX
73
x (P
MA)
Pa
ra
m
et
er
s
SERVICE DATA
(Service Data cont.) (Service Data cont.)
> MODULE FW VERS. > POWERSUPPLYDATA > MEMORY DATA
System version Type Ram memory size
System revision Version 29 Flash mem size
System date Serial number 29 CompactFlash 30
Bootloader PS temperature
uMon Operation time 29
Feed driver Total on time 29 Space for Jobs
Foil driver Max. Labellength
Head driver > CPU BOARD DATA Default values
Rewinder 29 CPU identifier
USI interface 29 PCB revision
Applicator int. 29 FPGA version
MAC address
> OPERATION DATA Serial number
Serv. operations Production date
Headnumber PCB part number
Roll number Board part numb.
Head run length Manufacturer 13
Roll run length Work place 13
Tot. mat. length Company name 13
Tot. foil length
Total head moves
> DISPLAY DATA
Head strobes Display version
Head temperature Display serialnr
Foil diameter Remote disp. vers. 24
Operation time Remote disip. # 24
F
W
6.60