Novexx Solutions ALX 92x, Service Manual, Page: 378 / 824

06/16 Rev. 04 SERVICE MANUAL Service Electronics Gen. 3
64-xx Gen. 3 – DPM Gen. 3 – PEM – ALX 92x Gen. 3 – ALX 73x (PMA)
9
AB D 300: Software debug LED
Only for factory-internal use
AC CN 300: Connection Centronics daughter board
AD CN 500: Connection RFID read/write unit
AE CN 1200: Connection Ethernet 10/100 Base T
Pin assignment see chapter Data interfaces at the mounting plate

on
page 12
AF D 1200: Ethernet status LED:
AG CN 703: Serial interface RS 232
Pin assignment see chapter Data interfaces at the mounting plate

on
page 12
AH LS 300: Audible signal generator
AI CN 401: USB interface (type A, host)
• Keyboard connection [2A]
• Inter Connect Port (ICP) [2B]; Connection to a dispenser main board
• Pin assignment see chapter
Data interfaces at the mounting plate

on
page 12
[2] Position of the two USB host interfaces.
AJ CN 402: Internal USB interface (host), parallel to CN 401
AK CN 400: USB interface (type B, device)
Pin assignment see chapter Data interfaces at the mounting plate

on
page 12
AL CN 403: USB interface (host); reserved
Pin assignment see CN 402
AM (only up to board index -06) CN 1300: CF-card slot
Suitable CF-cards: see Plug-in card manual

, topic section „Available
cards“, „Empty storage media“
AN CN 1301: Interface for optional second CF-card slot
See chapter CompactFlash daughter board

on page 16.
LED Meaning
Green Continuously lit : High transfer rate (100 Mbit/s)
Yellow Continuously lit : Device is connected with the network
Flashing : Communication with network
Pin Signal
1 +5 V
2 D –
3 D +
4 GND
B
A
1 2 3 4