06/16 Rev. 09
SERVICE MANUAL
Service Mechanics
DPM – PEM – ALX 92x
113
APSF-Rotary Encoder
To be able to operarte the machine with au-
tomatic product speed following (APSF), at
first the internal cable kit with the connector
for the rotary encoder has to be installed.
Prerequisites
•
DPM/PEM or ALX 92x with Gen. 3-Electro-
nics (CPU board A6621)
•
APSF upgrade kit (article no. A8382)
•
Firmware version 6.52 or higher
Assembly of internal cables
(ALX 92x)
Tools
Open-ended spanners size 17 and 19
Assembly
1. Remove the rear hood, see chapter
2. Remove the lower blind plug (position
[251A]) from the machines side panel.
3. Pass the cable [250A] from outside
through the opening.
The connector key [251B] must face the
built-in boards.
4. Fix the connector from inside with the nut
[250B] contained in the upgrade kit [252B].
Continue with chapter
[250] Content of the APSF upgrade kit (A8382).
[251] Connector (A) for the rotary encoder at the ALX 92x (RH)
side panel. Position of the connector key (B).
[252] Connector (A) for rotary encoder, locked from inside.
C
A
B
A
B
A
Summary of Contents for ALX 92x
