Novexx Solutions ALX 92x, Service Manual, Page: 266 / 824

06/16 Rev. 09 SERVICE MANUAL Service Mechanics
DPM – PEM – ALX 92x
68
Material guide
The material end sensor is located in the
inner material guide [137A].
Tools
•
Retaining ring pliers
•
2 mm allen key
Dismantling
1. Undo the set screw on the inner material
guide [137A]. Undo the thumbscrew on the
outer material guide [137B].
2. Push the outer material guide into the
middle of the guide rods.
3. For each of the two guide rods: spread the
front retaining ring and at the same time
pull out the guide rod [138].
4. Push the inner material guide out over the
inner guide rod end.
[137] A Inner material guide (secured with set screw)
B Outer material guide (secured with thumbscrew)
[138] Spread the retaining ring (B) and at the same time pull out
the rod (A).
A Guide rod
B Retaining ring
A
B
A
B