Novexx Solutions ALX 92x, Service Manual

Page: 54 / 824

07/15 Rev. 6.01-00 SERVICE-MANUAL Installation / Deinstallation
ALX 92x Decommissioning, Dismantling, Disposal
28
Decommissioning, Dismantling, Disposal
Take the machine out of operation
Disconnecting the machine from the compressed air supply (only machines with in-
stalled applicator):
1. Switch off the compressed air supply of the applicator.
2. Disconnect the compressed air hose from the applicator.
For details read the applicator installation manual.
Disconnect the machine from the power supply:
1. Switch the machine off at the mains switch (switch position „0“).
2. Pull out the mains plug from the mains socket or disconnect the power cord from
the electrical cabinet.
3. Disconnect all cables at the machine.
Dismantling the machine
Machine with installed applicator:
 Remove the applicator.
For details read the applicator installation manual.
1. Dismantle the unwinder.
See chapter Installing the unwinder

on page 7.
2. Dismantle the machine off the support stand.
See chapter Mounting the machine on a support stand

on page 5.
3. Strip the machine from the support stand tube and lay it down.
WARNING!
Danger of injury by the machine falling to ground.
 Let the machine be hold by at least 2 per-sons, while a 3rd person loosens the
clamping at the support stand.
 Wear safety footwear.
Acute risk of injury and long-term bodily in-jury from working with heavy loads!
 Lift or carry the machine with a minimum of 2 persons. If possible, use a crane
or other lifting device.
CAUTION!
To avoid damaging the machine during transport:
 Never hold the machine by the deflection rollers, dancer arm or rewind or unwind
unit.