Novexx Solutions ALX 92x, Service Manual

Page: 767 / 824

04/16 Rev. 11 USER + SERVICE MANUAL /Status Reports
64-xx – DPM – PEM – ALX 73x (PMA) – LPA 81x (Printer) – ALX 92x – AP 5.4 – AP 5.6
78
9108 Flash Ovf. Diag.
Status Occurs during a download. The flash memory on the CPU board has not
enough free memory space left for diagnose data.
Measure

Delete data blocks in the flash memory or reduce max. size of the diagnose
data.
9109 Flash Ovf. Params.
Status Occurs during a download. The flash memory on the CPU board has not
enough free memory space left to store the current parameter settings.

After a restart, the parameters are set to “Factory setting”.
Measure

Delete data blocks in the flash memory.
9110 Flash Write Err.
Status Occurs during a download. The flash memory can´t be accessed for writing.
Measure  Switch printer off and on again.
9111 PIC Update Fail.
Status Occurs during a firmware update or a PIC-controlled device, if the update
failed.
Measure  Switch printer off and on again.
9112 PIC missing
Status Occurs during a firmware update of a PIC-controlled device, if no such
device was found.
Measure

Check the configuration.
The status message is cancelled automatically. The download continues.
9113 RFID Update Fail.
Status Occurs during a firmware update of a RFID module, if the update failed.
Measure  Switch printer off and on again.
9114 RFID missing
Status Occurs during a firmware update of a RFID module, if no such device was
found.
Measure  Check the configuration.
The status message is cancelled automatically. The download continues.
9115 AWID missing
Status Occurs during a firmware update of an AWID RFID module, if a RFID
module of another manufacturer was found.
Measure  Check the configuration.
The status message is cancelled automatically. The download continues.