background image

Impressa F7/F8 Quick Reference Guide

This Guide does not replace the Operating Instructions. 

For details and cautions you must read all instructions.

Traces of Coffee Grounds in New Machine?

This is normal! Grinder was tested during assembly with beans.

Despite cleaning, traces of ground coffee may be found.

RED TEXT

represents information in the display.

A) First Time Ever Preparation

Place machine on a flat, hard surface.
1. Fill water in tank and beans in bean container.
2. DO NOT install the Water Filter Cartridge now!
3. Push 

ON/OFF

button. 

OPEN TAP

.

Place a cup under-

neath the frother and turn the 

SELECTOR

to the water

symbol.

SYSTEM FILLING

. Water pumps through the 

frother into the cup and stops automatically.

CLOSE TAP

.

Turn the 

SELECTOR

to the Cup Symbol.

SYSTEM FILLING

.

HEATING

. After two minutes 

PRESS RINSE

.

4. Place a cup underneath the coffee spout and push the 

RINSE

button. 

READY

. Place a large cup underneath the 

coffee spout and press the 

1-CUP

button. The F7/F8 

starts grinding and brews coffee. Discard the first two 
cups. 

READY

. You can only brew coffee when the display 

shows 

READY

.

B) Daily Preparation

• Fill fresh water in tank and check bean container.
• Push 

ON/OFF

button: 

HEATING

.

RINSE

.

• Place a cup under the coffee spouts and press the 

RINSE

button. 

READY

.

READY

SELECTOR

(enlarged view)

a. Coffee
b. Steam / Hot Water

On/Off  P Button  1-Cup   2-Cup     Rinse    Steam

DIAL

SELECTOR

Dual Frother PLUS

a

b

Impressa F7/F8
Control Panel

Dual Coffee
Dispenser Nozzels

Frother

sleeve

(slides up

and down)

mild
normal
strong

 

Summary of Contents for Impressa F7

Page 1: ... through the frother into the cup and stops automatically CLOSE TAP Turn the SELECTOR to the Cup Symbol SYSTEM FILLING HEATING After two minutes PRESS RINSE 4 Place a cup underneath the coffee spout and push the RINSE button READY Place a large cup underneath the coffee spout and press the 1 CUP button The F7 F8 starts grinding and brews coffee Discard the first two cups READY You can only brew co...

Page 2: ...TOR to the Coffee Symbol You can always stop the hot water flow before the display shows CLOSE TAP G Using Steam Frothing and Steaming Important frother parts must be tightly connected and clean Cappuccino One shot espresso plus 4 oz of steamed and frothed milk Metal frother sleeve DOWN Latte One shot espresso plus 4 to 5 oz of steamed milk Metal frother sleeve UP steaming only no frothing 1 Push ...

Page 3: ...SE TAP Turn the SELECTOR to the cup symbol HEATING READY The display will remind you when it s time to replace the cartridge Please note When the filter program is activated the decalcifying program HARDNESS is turned off Important Do not let the filter dry out Filter needs to be submersed in water See page 16 Operating Instructions L Replacing and Activating the Clearyl Water Filter When display ...

Page 4: ... 3 SOLVENT IN TANK OPEN TAP Dissolve three large square tablets in 16 oz of water remove tank and pour mixture into empty water tank and replace 4 Place a container at least 16 oz underneath frother Turn the SELECTOR to the water symbol DECALC ON After a few minutes CLOSE TAP Turn the SELECTOR to the cup symbol DECALC ON After a few minutes EMPTY TRAY 5 Carefully remove container and drawer empty ...

Reviews: