background image

2.

PRESS RINSE

. Push the 

RINSE

button. 

CLEANING

. After

a moment  the display shows

ADD TABLET

.

3. Open the ground coffee lid and drop one tablet into the 

coffee funnel. Close lid.  

PRESS RINSE

. Push the 

RINSE

button. 

CLEANING

. After a few minutes: 

EMPTY TRAY

.

Carefully lift, remove and empty drawer and replace. 

READY

. The machine resets itself and reminds you to 

clean again after the next 200 cups. 

N) Decalcifying  

DESCALE / READY

For different water hardness levels see Operating Instructions.
If a water hardness level is selected, the decalcifying monitor
is active. 

Decalcify when above message appears.

Important:

If you use the Clearyl Filter and the above 

message appears, then the Clearyl Installation procedure
was not performed properly.

Important:

The decalcifying program must not be interrupted.

• Use only the special decalcifying tablets (not the cleaning 

tablets!). For decalc tablet supply see next page.

1. Push the 

RINSE

button; the display shows 

EMPTY TRAY

.

2. Remove and empty drawer. You must remove the drawer 

for 20 seconds, even if it is empty. Replace complete drawer.

Decalcifying Session:

3.

SOLVENT IN TANK / OPEN TAP

. Dissolve three large 

square tablets in 16 oz. of water, remove tank and pour 
mixture into empty water tank and replace. 

4. Place a container (at least 16 oz.) underneath frother.

Turn the 

SELECTOR

to the water symbol. 

DECALC.ON

.

After a few minutes: 

CLOSE TAP

. Turn the 

SELECTOR

to

the cup symbol. 

DECALC.ON

. After a few minutes 

EMPTY TRAY

.

5. Carefully remove container and drawer, empty and replace.

Cleaning Session: 

6.

FILL WATER

. Rinse water tank and fill with cold water 

(16 oz.) and replace. Place a container under the frother. 

7.

OPEN TAP

. Turn the 

SELECTOR

to the water symbol. 

DECALC.ON

. After a few minutes: 

CLOSE TAP

. Turn the 

SELECTOR

to  the cup symbol. 

DECALC.ON

. After a few

minutes 

EMPTY TRAY

. Carefully remove container and 

drawer, empty and replace.

8.

HEATING

. Then 

PRESS RINSE

. Push the 

RINSE

button. 

The machine returns to 

READY

and resets itself. 

CAPRESSO CUSTOMER  SERVICE 

1-800-220-5701

M-F 9AM - 9PM;  Sat. 9AM - 5PM EST

FAX: 201-767-9684 • email: [email protected]

O) Supplies 

can be ordered through: 

Customer Service or Mail Order Form or www.capresso.com:
• Clearyl Water Filter Cartridge: #64553
• Special Cleaning Tablets: #62205
• Decalcifying Tablets: #61848
• Cappuccino Cleaner: #63801, removes milk fat from frother
• Grand Aroma Coffee Beans: #921, regular, decaf, espresso

64695R2/1006

Summary of Contents for Impressa F7

Page 1: ... through the frother into the cup and stops automatically CLOSE TAP Turn the SELECTOR to the Cup Symbol SYSTEM FILLING HEATING After two minutes PRESS RINSE 4 Place a cup underneath the coffee spout and push the RINSE button READY Place a large cup underneath the coffee spout and press the 1 CUP button The F7 F8 starts grinding and brews coffee Discard the first two cups READY You can only brew co...

Page 2: ...TOR to the Coffee Symbol You can always stop the hot water flow before the display shows CLOSE TAP G Using Steam Frothing and Steaming Important frother parts must be tightly connected and clean Cappuccino One shot espresso plus 4 oz of steamed and frothed milk Metal frother sleeve DOWN Latte One shot espresso plus 4 to 5 oz of steamed milk Metal frother sleeve UP steaming only no frothing 1 Push ...

Page 3: ...SE TAP Turn the SELECTOR to the cup symbol HEATING READY The display will remind you when it s time to replace the cartridge Please note When the filter program is activated the decalcifying program HARDNESS is turned off Important Do not let the filter dry out Filter needs to be submersed in water See page 16 Operating Instructions L Replacing and Activating the Clearyl Water Filter When display ...

Page 4: ... 3 SOLVENT IN TANK OPEN TAP Dissolve three large square tablets in 16 oz of water remove tank and pour mixture into empty water tank and replace 4 Place a container at least 16 oz underneath frother Turn the SELECTOR to the water symbol DECALC ON After a few minutes CLOSE TAP Turn the SELECTOR to the cup symbol DECALC ON After a few minutes EMPTY TRAY 5 Carefully remove container and drawer empty ...

Reviews: