manualshive.com logo in svg

Novexx Solutions ALX 92x, Service Manual, Page: 123 / 824

Share
Download
Novexx Solutions ALX 92x Service Manual Download Page 123

06/15 Rev. 5.08-01

USER MANUAL

Internal Fonts

All printers

4

After successfully loading a font file, the following message appears:

Restart the printer to activate the fonts.

If not enough unused flash memory is available, the following message appears:

Followed by:

Restart the printer.

Numbering

Customized fonts can override the standard fonts included in the firmware partially 
or fully, or they can supplement the standard fonts. In the latter case, font numbers 
of the customized fonts start with 400.

Overview loaded fonts

A list of sample printouts of the loaded fonts can be generated with the status printout 

PRINT INFO > Flashdata status

 [1].

This parameter only appears, if any fonts are already loaded into the flash mem-

ory.

Data done

KBytes:  xx

Data update

Flash full

Data update

Loader Error

Summary of Contents for ALX 92x

























































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments